DrayTek Vigor 2952P

Categories:

Dual-WAN Broadband Fibre Router with Security Firewall
4x PoE LAN ports, 100 x VPN & 50 x SSL-VPN tunnels

Description

  • 1 x Gigabit Ethernet/SFP combo WAN port
  • 1 x Gigabit Ethernet WAN port
  • Multi-WAN Load Balancing & Failover
  • 4 x Gigabit PoE Ethernet LAN ports with 60,000 NAT sessions
  • Complies with 802.3at Power over Ethernet Plus
  • Supports PoE power up to 30 watts for each port
  • Total PoE power budget up to 60 watts
  • 1 x USB port (USB3.0) support 3G/4G LTE mobile broadband access
  • 100 x VPN and 50 x SSL-VPN tunnels with Central VPN Management, VPN Load Balance and Redundancy
  • High Availability Mode
  • Object-oriented Firewall with Content Security Management (CSM)
  • IPv6 & IPv4
  • Comprehensive QoS features
  • Multi subnet WAN/LAN through 802.1Q
  • 1 x USB port (USB2.0) support file sharing, external storage, network printer or thermometer
  • Central AP Management (up to 30 Access Points)
  • Central Switch Management (up to 10 Switches)
  • Smart Monitor Traffic Analyzer (up to 100 nodes)
  • Works with VigorACS SI management system
  • Rack-mountable
  • 2 years back to base warranty

 


  • Specification details

    1. Ethernet WAN
      • IPv4
        • DHCP Client, Static IP, PPPoE, PPTP, L2TP, 802.1q Multi-VLAN Tagging
      • IPv6
        • Tunnel Mode: TSPC, AICCU, 6rd, Static 6in4
        • Dual Stack: PPP, DHCPv6 Client, Static IPv6
      • WAN Connection Failover
      • WAN Budget
      • Load Balance/Route Policy
    2. Ethernet LAN
      • IPv4/IPv6 DHCP Server
      • Static Routing/RIP
      • Multiple Subnets
      • Port/Tag-based VLAN
    3. PoE
      • Standard: 802.3at
      • PoE Ports: 4 ports
      • Power Budget: 60 Watt (Max. 30Watt per port)
      • Mode : Auto or Manual
      • Schedule
      • Status
      • PD Device Check
      • Notification (Add a new Category in Notification Object)
      • PoE information on Dashbaord
    4. USB
      • 3.5G/4G LTE(PPP, DHCP) as WAN3/ WAN4
      • Printer Server/File Sharing

    Management

    1. System Maintenance
      • HTTP/HTTPS with 2-level Management (Admin/User)
      • Logging via Syslog
      • SNMP Management MIB-II (v2/v3)
      • CLI (Command Line Interface, Telnet/SSH)
      • Administration Access Control
      • Web-based Diagnostic Functionality
      • Firmware Upgrade via TFTP/FTP/HTTP/TR-069
      • CWMP Support (TR-069/TR-104)
      • LAN Port Monitoring
    2. Network Management
      • Bandwidth Management by Session/Bandwidth
      • User Management by Time/Data Quota
      • LAN DNS and DNS Proxy/Cache
      • Dynamic DNS
      • IGMP Snooping/Proxy v2 and v3
      • QoS (DSCP/Class-based/4-level Priority)
      • Guarantee Bandwidth for VoIP
      • Support Smart Monitor (Up to 100 nodes)
      • Central AP Management
      • Central VPN Management
      • Switch Management¬†(New Firmware will be released soon)

    Security

    • Multi-NAT, DMZ Host, Port-redirection and Open Port
    • Object-based Firewall, Object IPv6, Group IPv6
    • MAC Address Filter
    • SPI (Stateful Packet Inspection) (Flow Track)
    • DoS/DDoS Prevention
    • IP Address Anti-spoofing
    • E-mail Alert and Logging via Syslog
    • Bind IP to MAC Address
    • Time Schedule Control
    • Content Security (IM/P2P, URL, Keywords, Cookies, etc.)

    VPN

    • Up to 100 VPN Tunnels
    • Protocol: PPTP, IPsec, L2TP, L2TP over IPsec
    • Encryption: MPPE and Hardware-based AES/DES/3DES
    • Authentication: MD5, SHA-1
    • IKE Authentication: Pre-shared Key and Digital Signature (X.509)
    • LAN-to-LAN, Teleworker-to-LAN
    • DHCP over IPsec
    • IPsec NAT-traversal (NAT-T)
    • Dead Peer Detection (DPD)
    • VPN Pass-through
    • VPN Wizard
    • mOTP
    • Supports 50 SSL VPN Tunnels
    • VPN Trunk: VPN Backup and Load Balance

    Hardware Interface

    • 1 x Combo WAN, 10/100/1000Base-Tx, RJ-45 or SFP (WAN1)(Fiber Port is High Priority)
    • 1 x 10/100/1000Base-Tx, RJ-45 (WAN2)
    • 4 x 10/100/1000Base-Tx LAN, RJ-45 (P1 is Configurable as DMZ Port)
    • 2 x USB Host (USB1 is 2.0 and USB2 is 3.0)
    • 1 x Factory Reset Button

Additional information

Brand

Draytek